What are the environmental requirements for the laser pipe cutting machine?

When we contact new customers, customers often ask us what are the environmental requirements for the use of this Laser Pipe Cutting Machine? Will the requirements for the use of this high-tech equipment be very harsh? These questions are often asked by new customers. In response to these two questions, the following Jettech laser pipe cutting machine manufacturer will analyze the use conditions of the laser pipe cutting machine in detail for you.

1. Power supply specifications: three-phase five-wire system, 380V 50Hz, three-phase unbalance <2.5%, line voltage
2. Protective grounding: machine tool grounding resistance <4Ω.
3. The ventilation strip is good, no dust, no corrosion, no pollution, no conductive dust.
4. There is no large vibration around the machine tool, and anti-vibration trenches are dug around the bed.
5. The laser is required to be installed at an ambient temperature of 20°C (to prevent condensation), and an inspection channel of more than 1 meter should be reserved around it.
6. The refrigerator is a special equipment for providing cooling circulating water to the laser and the cutting head collimation device. The cooling circulating water requires high-quality deionized water (pure water), the conductivity is less than 10 micro Siemens, and the optimal flow rate is 1 liter. /minute.
7. The back of the machine tool is the electrical control cabinet, and the front is the operating table. The distance between the electrical control cabinet and the workshop wall should be greater than 1.5M;
8. The numerical control unit, servo drive unit, display and control panel are the brains of the machine tool and should avoid interference from external electromagnetic waves.
9. In order to prevent the occurrence of fire, the workplace should be equipped with a certain number of fire extinguishers and reserve a fire exit with a width of more than 1 meter.
The above are the environmental requirements for the laser pipe cutting machine. Therefore, before installing the laser pipe cutting machine, we first investigate the environment of the installation location, preferably a place that meets the above working conditions, so as to prevent some external adverse environmental factors from affecting The normal operation of the machine ensures the efficient operation of the machine.