What should be paid attention to in fiber laser cutting machine typesetting?

Before using the laser cutting machine, we will import the prepared drawings into the program, and then use the typesetting software to arrange the graphics on a board, so that the laser cutting machine can process the products in batches. Among them, although the typesetting process is very short, there is a lot of knowledge hidden in it. If the typesetting is slightly wrong, it will have a great impact on the cutting effect of the entire board. So, let`s list the three major considerations in typography below.

1. Corner melting

When decelerating to cut the corners of thin steel sheets, the laser can overheat and melt the corners. A small radius is generated at the corner to maintain the high-speed cutting of the laser and avoid the phenomenon of overheating and melting of the steel plate when cutting the corner, so as to obtain good cutting quality, reduce cutting time and improve productivity.

2. Common edge cutting

Two or more parts are co-edged into a combination, and a large number of regular graphics are co-edged as much as possible. Co-edged cutting can greatly shorten the cutting time and save raw materials.

3. Surplus material treatment
After the parts are cut, the skeleton-shaped remaining material on the laser cutting equipment workbench needs to be removed as soon as possible to facilitate subsequent cutting operations. For laser cutting equipment without an automatic unloading device, the skeleton-like residual material can be cut into small pieces for quick removal. Thereby avoiding the operator's personal injury caused by moving heavy and sharp-edged residual materials.